Preparing for Winter
If you’re storing your Hotsy pressure washer in a cold place over winter, you must properly winterize the machine beforehand to protect the coil and pump. Otherwise, you may face costly repairs in the spring. Keep reading to find out how to winterize your pressure washer.
Steps for winterizing a Hotsy pressure washer
Winterizing your pressure washer is simple and involves the following:
- Disconnect the water supply from the pressure washer and connect the antifreeze solution container.
- Fill the solution container with antifreeze solution or wiper fluid.
- Turn on the pressure washer so that the solution starts flowing.
- When the solution starts coming out of the trigger gun, direct it back into the container.
- Let the solution cycle through the pumping system a few times by opening and closing trigger gun in order to reach all the nooks and crannies.
- Turn off the machine as well as the solution supply.
- For machines with a flow tank, simply fill the tank with the solution and follow the same process.
Can a pressure washer freeze?
Yes. Any water that’s left in the pressure washer pump, coil, fittings, gun jet, or hose can freeze. And since water expands when it freezes, it can damage these components.
Is it ok to run a pressure washer without water?
No. A pressure washer needs water circulating while running, or the seals, gaskets, and other components may get damaged.
How do I protect my pressure washer pump?
To make your pump last longer, flush it out after each use, or as often as possible, with a pump lubricant. This protects against mineral and rust buildup caused by moisture in the pump.